Also known as: VEEMUX® audio / video matrix switch via CAT5, video router, routing switcher,
video switch, video port router, matrix switch, audio/video switch, video matrices.
|
The Audio/Video Matrix Switch via CAT5 works with NTI's 600 foot CAT5 transmitters and receivers to create a high performance audio/video signal routing system with a maximum extension of 183 meters between the local and remote units. Crisp and clear 1024x768 resolution is supported at 183 meters; higher resolutions, up to 1920x1440, are supported at shorter distances.
The Audio/Video Matrix Switch via CAT5 is capable of connecting to as many as 32 video sources and 16 video displays.
A single computer audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connect to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system.
- Configure and control the switch though Ethernet, serial port or front panel buttons.
|
- Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface.
- Equipped with Liquid Crystal Display (LCD) for front panel operation.
- A digital VU-meter shows the audio levels of the selected output.
- Each output provides one video signal and one stereo audio signal.
- Each input can be independently connected to any or all outputs.
- No loss of audio or video quality between the local and remote units.
- 1RU or 2RU rackmount case is standard.
- VGA and S-Video transmitters and receivers can be supported on the same VEEMUX unit.
- VGA inputs only work with VGA outputs, and S-Video inputs only work with S-Video outputs.
|
|
|
VEEMUX SM-nXm-C5AV-LCD
- Female RJ45 input/output connectors.
- Analog bandwidth is 175 MHz.
- 10/100BaseT ethernet interface.
- Supported protocols: HTTP. HTTPS, Telnet
- RS232 interface
Power- 110 or 220 VAC at 50 or 60 Hz via IEC connector.
- Power consumption: 8x8: 20W, 8x16: 30W, 16x8: 30W, 16x16: 30W, 32x8: 35W, 32x16: 35W
MTBF
Cables- CAT5, CAT5e or CAT6 UTP straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
Environmental- Operating temperature: 0°C to 38°C (32°F to 100°F).
- Storage temperature: -30°C to 60°C (-20°F to 140°F).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
Warranty
Local Unit (Transmitter)
Video- VGA transmitter:
- Male 15-pin HD connector.
- Compatible with SVGA, XGA, and VGA.
- S-Video transmitter:
- Male 4-pin miniDIN connector.
- Compatible with S-Video.
- Input impedance: 75 Ohms.
- Maximum input level: 1.45Vp-p.
- Supports Separate and Composite TTL level sync.
- Input Sync frequency ranges:
- Horizontal: 15 kHz to 130 kHz.
- Vertical: 30 kHz to 150 Hz.
- Video is DC coupled.
Audio- VGA video/audio transmitter: 3.5mm stereo audio plug.
- S-Video audio/video transmitter: dual RCA plugs.
- Input impedance: 10k Ohms.
- Maximum input levels: 3.1Vp-p (line level).
Power- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
Environmental- Operating temperature: 0°C to 38°C (32°F to 100°F).
- Storage temperature: -30°C to 60°C (-20°F to 140°F).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
Warranty
|
Remote Unit (Receiver)
Video- VGA receiver:
- Female 15-pin HD connector.
- Supports resolutions up to 1920x1440.
- S-Video receiver:
- Female 4-pin miniDIN connector.
- Supports maximum 800x600 S-Video resolution.
- Video quality adjustment for different lengths of CAT5/5e/6 cable is done manually for video-only units and automatically for audio/video units.
- When using CAT6, some degradation may be experienced depending on the length of the cable.
- Output impedance: 75 Ohms.
- Maximum output level: 1.45Vp-p.
Audio- 3.5mm stereo audio jack.
- Frequency response: 20 Hz to 20 kHz, +/-1dB.
- Signal-to-Noise Ratio (SNR): 76 dBA.
- Total Harmonic Distortion and Noise (THD+N): 0.017%.
- Stereo crosstalk: -70 dB.
- Maximum output levels: 3.1Vp-p (line level).
- Line level output: supports multimedia speakers.
- Require powered speakers.
Power- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
Environmental- Operating temperature: 0°C to 38°C (32°F to 100°F).
- Storage temperature: -30°C to 60°C (-20°F to 140°F).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory ApprovalsWarranty
|
|
Front Panel Interface- Liquid Crystal Display (LCD) can display all current connections.
- Locally change input and output selections with front panel buttons.
- Digital VU-Meter displays audio levels for the currently selected port.
- Configuration and control can be done using the front panel buttons.
- Main menu allows the user to:
- Set serial address.
- Set serial speed.
- Set IP address.
- Set Subnet Mask.
- Adjust contrast.
- Force compensation.
- Show size.
RS232 Control- Configuration and control can be done through the serial port.
- Control the switch using Matrix Control Software with Graphical User Interface (GUI control) via RS232.
- Selectable baud rate: 1200 through 9600.
- Baud rate is set via the main menu, serial command, telnet or web page.
Commands- CS-causes one INx/OUTx connection to occur.
- CA-causes all inputs to connect to specified output.
- RO-reads what input is connected to specified output.
- CC-save matrix.
- RC-recall matrix.
- CB-change baud rate.
- RV-version information.
- RU-reads size of matrix, reports number of inputs and number of outputs on specified switch.
- EA-set the IP address.
- EM-set the IP mask.
- EG-set the default gateway.
- ET-set the webserver timeout.
|
Ethernet Control- Configuration can be done over the Internet via web page or telnet.
- Security is ensured by password and user configurable timeout.
- Up to 25 users can access the web page at one time.
- The user can access the following pages:
- Switch page: allows the user to connect any input to any output, save and recall up to ten connections.
- Administration pages: administrator can access setup pages, port setting page and update firmware page.
- Password page: allows the user to change the password for accessing the web interface.
- Help page: documentation on the usage of the web interface.
- Update Web Server page: globally update the web server to any settings that have been changed.
- Logout page: view currently active connections and logout of the web interface.
Telnet- Security is ensured by password.
- Commands are similar to RS232 commands.
| Distances and Resolutions for CAT5/CAT5e and CAT6 Cables |
| Cable |
Distance
(meters) |
Resolution |
CAT5/
CAT5e |
183 |
1024x768 at 60Hz |
| 122 |
1280x1024 at 60Hz |
| 91 |
1600x1200 at 60Hz |
| 30 |
1920x1440 at 60Hz |
| CAT6 |
91 |
1024x768 at 60Hz |
| 61 |
1280x1024 at 60Hz |
| 30 |
1920x1440 at 60Hz |
|
|
Application Note: Local KVM Switching and Remote Video Presentation Display
Data Sheet (PDF)
CAD Drawings:
