| ENVIROMUX-STS |
 |
|
- Applications from 0°C to 50°C (32°F to 122°F).
- Accurate to within ±1°C (±2°F).
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Includes mounting hardware.
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 330 meters (not included)
- Regulatory approvals: RoHS
| 
| ENVIROMUX-SHS |
|
|
- Applications from 20% to 80% relative humidity at temperatures between
0°C to 40°C (32°F and 104°F).
- Accurate to within ±5% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Includes mounting hardware.
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 330 meters (not included)
- Regulatory approvals: RoHS
|
ENVIROMUX-STHS
|
|
|
- Applications from 0°C to 50°C (32°F to 122°F) and 20% to 80% relative humidity.
- Accurate to within ±1°C (±2°F) and ±5% relative humidity.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Includes mounting hardware.
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 330 meters (not included)
- Regulatory approvals: RoHS
|
| ENVIROMUX-STHS-99 |
|
|
- Applications from 0°C to 50°C
(32°F to 122°F)
- Accurate to within
±1°C (±2°F)
- 20% to 80% relative humidity, ±3%
- 10% to 90% relative humidity, ±4%
- 0% to 99% relative humidity, ±5%
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Includes mounting hardware.
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 330 meters (not included)
- Regulatory approvals: RoHS
|
|
- NIST certified accurate to within ±1% from 10% to 80% relative humidity at 25°C to 35°C (77°F to 95°F).
- Two-point field calibration.
- Output: 4-20mA DC = 0% to 100% RH.
- Requires the ENVIROMUX-S420MA to operate.
|
|
- Available temperature ranges:
- -20°F to 140°F (-28°C
to 60°C).
- -6°C to 48°C (20°F to 120°F).
- -1°C to 82°C (30°F to 180°F).
- Temperature accurate to within ± 1.50%.
- NIST certified accurate to within ±1% from 10% to 80% relative humidity at 25°C to 35°C (77°F to 95°F).
- Uses a platinum RTD for precision temperature compensation.
- Sensing element: 1000W platinum; 2 lead resistance thermometer, .00385 TCR
- Two-point field calibration.
- Output: 4-20mA DC = 0% to 100% RH.
- Requires the ENVIROMUX-S420MA to operate.
|
| ENVIROMUX-M-DCS |
|
|
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- 2-wire interface.
- Screw terminal.
- Maximum cable length: 330 meters
- Wide actuating gap, approximately 25.4 mm.
- Dimensions WxDxH (mm): 12.7x12.7x50.8 (Switch), 12.7x12.7x50.8 (Magnet).
- Regulatory approvals: RoHS
|
| ENVIROMUX-LDS-xx |
|
|
- For warning of flooding.
- Detects liquid depth >0.25 cm.
- Minimum puddle: 1.53 cm diameter.
- 100% waterproof electronics.
- Detects any liquid, except deionized water.
- RJ45 connector.
- Supports CAT5/5e/6 cable up to 330 meters (not included).
- Available sensor cable lengths: .9/1.8/3/7.6 meters
- Regulatory approvals: CE, RoHS
|
| ENVIROMUX-BCN-R |
|
|
- Emits flashing red light when activated.
- Flash Rate: 90 per minute.
- Screw terminal.
- 2-wire interface.
- Maximum cable length: 30 meters
- Regulatory approvals: RoHS
|
|
- Continuous air monitoring.
- Pre-set alarm points alert at:
- 70 ppm after 60 to 240 minutes
- 150 ppm after 10 to 50 minutes
- 400 ppm after 4 to 15 minutes
- Flush or surface mount.
- LED indicators for operation status and system test.
|
| ENVIROMUX-VSS |
|
|
- For registering movement and shocks.
- Adjustable sensitivity.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 330 meters
- Regulatory approvals: RoHS
|
ENVIROMUX-GBS |
- Acoustically detects the cracking of glass.
- Adjustable sensitivity.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 330 meters
|
ENVIROMUX-ACK
|
|
|
- Two relay outputs controlled by two groups of independent user codes.
- Output 1: 5 Amp relay for door strike
- Output 2: 1 Amp relay for other control applications.
- Normally closed and normally open dry contacts for both output relays.
- LED indicators for operation status and system status.
- Terminal block for all external connections.
- Single lock or inter-lock operation.
- Operate with fail-safe or fail-secure locking device.
- Door open announcer.
- Non-volatile memory in case of power failure.
- Regulatory approvals: CE, RoHS
|
| ENVIROMUX-SRN-M |
|
|
- Emits ear-piercing sound to deter intruders
- Output Level: 108 dB
- Dimensions WxDxH (mm): 38.1x43.18x60.96
- Screw terminal.
- 2-wire interface.
- Maximum cable length: 30 meters
- Regulatory approvals: RoHS
|
| ENVIROMUX-IMD-CM |
|
|
- Detects movement across the detection field.
- 360° detection pattern.
- 113° conical detection angle from ceiling.
- 11 m diameter protection when mounted 3.7 m high.
- Provides substantial immunity to false alarms caused by environmental disturbances.
- Pulse count or single shot triggering.
- Good RFI protection
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 330 meters
- Regulatory approvals: CE, RoHS
|
ENVIROMUX-EDR-SCR
ENVIROMUX-EDR-SF |
- Combine with ENVIROMUX-ACK, access control digital keypad, to convert a standard cylindrical lock set to an electronic access control locking system with high security and user convenience without a key.
- Fail-Safe Electric Strike (ENVIROMUX-EDR-SF)
- The door is locked with power ON, and unlocked with power OFF.
- For Fire/Emergency door or Escape door installations.
- Fail-Secure Electric Strike (ENVIROMUX-EDR-SCR)
- The door is locked with power OFF, and unlocked with power ON.
- For Entrance door installation.
- Regulatory approvals: CE
|
| ENVIROMUX-S60VDC |
|
|
- Monitors up to two DC voltages: -60VDC ~ 0VDC or 0VDC ~ 60VDC
- Connector: Screw Terminal, 5-position
- Supports CAT5/5e/6 cable up to 330 meters (not included)
- Includes Mounting Hardware
- Regulatory approvals: RoHS
|
| ENVIROMUX-S420MA |
|
|
- External RJ45 device monitors up to two 4-20mA analog sensors
- Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors
- Provides 18VDC, 25mA for each sensor
- Connector: Screw Terminal, 8-position.
- Supports CAT5/5e/6 cable up to 330 meters (not included)
- Includes Mounting Hardware
- Regulatory approvals: RoHS.
|
| ENVIROMUX-AFM |
|
|
- Reliable mechanical solution for monitoring
air flow.
- Reacts to any condition causing insufficient flow of air such as malfunctioning cooling fan, increased friction, or physical blockage.
- Can be used for direct monitoring of a cooling fan.
- Dimensions WxDxH (mm): 34x17.5x7.5
- Switch contact is closed when air flow is >2.5 m/s.
- Connection: 2x single strand AWG26, length 0.5 m.
- Regulatory approvals: RoHS
|
| ENVIROMUX-2W-xx |
|
|
- 2-wire sensor cable.
- Use to connect dry contact sensors to the ENVIROMUX-SEMS-16.
- Available lengths (m): .9/1.8/3/7.6/15/30
- Regulatory approvals: RoHS, UL
|
| ENVIROMUX-RKS |
|
|
- Remote key station designed for security system ON-OFF control applications.
- Built with universal connection terminals; can be used freely with most security systems.
- Provides momentary contact with spring return.
- Standard single gang mounting box.
- Built-in tamper switch.
- Built-in connection terminals.
- For security system and door strike applications.
- Dimensions WxDxH (mm): 43.18x73.66x116.84
- Regulatory approvals: RoHS
|
| ENVIROMUX-GSM |
|
|
- Sends SMS text messages to a pager or cell phone when a sensor goes out of range of a configurable threshold.
- SIM card required (not included).
- Interfaces with the ENVIROMUX-SEMS-16 via a female DB9 RS232 connector.
- Frequency (MHz): 850/900/1800/1900
- Protocols: AT commands, UDP/API, PPP, UDP/PAD, CMUX, TCP/PAD, TCP/API
- Includes serial cable, power supply, and antenna.
- Dimensions WxDxH (mm): 63.5x63.5x22.6
- Regulatory Approvals: CE, FCC, RoHS
|
| ENVIROMUX-IMD |
|
|
- Registers movement in the area covered.
- Condition display via LED.
- Provides immunity from common-mode signals such as the effect of strong hot or cold air currents, variation in ambient temperature, background radiation and acoustic noise.
- 24 dual-element detection zones for long, mid and short range protections.
- Surface or corner mounting
- Pulse count or single shot triggering.
- Good RFI protection.
- Screw terminal
- Maximum cable length: 330 meters
- Regulatory approvals: CE, RoHS
|
| ENVIROMUX-IMD-MW |
|
|
- Detects movement across the detection field.
- Provides substantial immunity to false alarms caused by environmental disturbances.
- Pulse count or single shot triggering.
- Good RFI protection.
- Dimensions WxDxH (mm): 55.88x30.48x73.66
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 330 meters
- Regulatory approvals: CE, RoHS
|
| ENVIROMUX-EBS |
|
|
- Sends activation signal when button is pressed.
- For normally closed or normally open circuit connections.
- 2-wire interface.
- Screw terminal.
- Maximum cable length: 330 meters
- Dimensions WxDxH (mm): 10.16x22.86x76.2
- Regulatory approvals: RoHS
|
ENVIROMUX-MB-IMD |
- Mounting bracket for installing the infrared motion sensors to a ceiling or wall.
- 360° Angle Adjustment
- For use with the ENVIROMUX-IMD, ENVIROMUX-IMD-CM, and ENVIROMUX-IMD-MW motion detectors.
|
|
 |
- For warning of smoke.
- Built-in 57° C (135° F) thermal heat sensor.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Photoelectric smoke detector.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 330 meters
- Regulatory approvals: UL
| |
