The ENVIROMUX® Secure Remote Power Control Unit allows you to remotely reboot and control power (on/off) to up to eight servers or other powered devices from any location via secure web interface, RS232, SSH, or Telnet.
- Three operating modes for power reboot:
- Manual — select the outlet and turn the power on/off.
- Scheduled — set date/time/duration of power cycle.
- Associated — power on/off a device when a sensor goes out of range of a user-defined threshold, or reboot unresponsive IP devices.
- Security: HTTPS, SSHv2, SSLv3, IP Filtering, LDAPv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
- Configure, control and monitor the unit via Web interface or Command Line Interface (CLI).
- Current, line voltage, line frequency, power factor monitoring (4/8-port models only).
|
- Monitor (ping) up to eight IP network devices.
Supports two environmental sensors, including: temperature, humidity, and water detection.
- Sends alert notifications via email, syslog, LEDs, Web page, SNMP
- Overload protection via circuit breaker (4/8-port models only).
- Meets the electrostatic discharge (ESD) immunity requirements of IEC/EN 61000-4-2
- Features Normally Open (NO) relay contacts.
- The 4/8-port units are available with optional Normally Closed (NC) relay contacts.
- Optional industrial unit for harsh environments at temperatures from -40° to 158°F (-40° to 70°C).
|
Power
- 90 to 250 VAC at 50 to 60 Hz.
- Input Connector:
- IPDU-S2: IEC 320-C14 inlet
- IPDU-Sx-P15(-OT3): NEMA 5-15P line cord (US)
- IPDU-Sx-P10(-OT3): IEC 320-C14 inlet (EURO)
- Output Connectors: IEC C13 outlets.
- IPDU-S2: IEC 320-C13 outlets
- IPDU-Sx-P15(-OT3): NEMA 5-15R outlets (US)
- IPDU-Sx-P10(-OT3): IEC 320-C13 outlets (EURO)
| |
Current Rating |
| NTI Part # |
Input/Output |
Location |
| IPDU-S2 |
12A |
All |
| IPDU-Sx-P15 |
15A |
US/Canada |
| IPDU-Sx-P10 |
10A |
Euro/UK | |
RJ45 Sensor Ports
- Two RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, light intensity, and liquid detection sensors.
- Available sensors
Network Interface
- One 10/100 Base-T Ethernet port with RJ45 Ethernet connector.
Console Port
- One female RJ45 port for terminal access.
Secure Remote Power Control Unit with USB 3G Modem
(ENVIROMUX-3GU) |
Cascade Port (4/8-Port Models)
- Two RJ45 modular jacks for cascading up to 16 units.
USB Port (4/8-Port Models)
- Female USB Type A connector for connecting USB modem or for downloading log data to USB flash drive.
Environmental
- IPDU-S2, IPDU-Sx-P15/P10:
- Operating temperature: 32°F to 122°F (0°C to 50°C).
- Storage temperature: -13°F to 149°F (-25°C to 65°C).
- IPDU-Sx-P15/P10-OT3:
- Operating temperature: -40°F to 158°F (-40°C to 70°C).
- Storage temperature: -40°F to 185°F (-40°C to 85°C).
- Operating/storage relative humidity: 0 to 90% non-condensing RH.
Protocols
- HTTPS, SSHv2, SSLv3, LDAPv3, AES 256-bit encryption, SNMPv2c.
- Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or RS232 interface.
- Alerts are sent using email, syslog, and/or SNMP traps when devices are not responding and when a sensor goes out of range of a configurable threshold.
- Alerts are posted in message log, which is accessible through Web user interface. The log can be downloaded as a tab-delimited plain text file.
Regulatory Approvals
Warranty
|
Data Sheet (PDF)
