Hosts

• Female 15-pin HD connectors.
• Supports USB-enabled PC, SUN and MAC computers with VGA video.
• Multiplatform support: Windows 2000/XP/Vista/Server 2000/2003/2008, Solaris, Linux, FreeBSD, and MAC OS 9/10.
• Any old/legacy PS/2 or SUN computer can be connected by using a USB-PS2-R or USB-SUN-R.

Monitor

• Crisp and clear 2048x1536 resolution.
• One female 15-pin HD connector.
• A multiscan VGA monitor is required to display the different video outputs from different platforms.
• Bandwidth is 150 MHz.

Devices

• Two female USB Type A connectors.
• Compatible with most USB keyboards and mice, including Microsoft USB Intellimouse®
• Keyboard and mouse are hot-pluggable.
• Available with an optional female USB Type A connector for an additional USB 1.1 device.
  • Use to connect a USB touch screen monitor, CAC card reader, or other USB devices.

Power

• 110 or 220 VAC at 50 or 60 Hz via IEC connector.

Dimensions

• 4-, 8- and 16-port switches WxDxH (mm):
  • 424x173x45 (without supplied rackmount kit)
  • 483x173x45 (with supplied rackmount kit)
• 32-port switches WxDxH (mm): 483x254x89

Environmental

• Operating temperature: 0°C to 38°C (32°F to 100°F).
• Storage temperature: -30°C to 60°C (-20°F to 140°F).
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.

Regulatory Approval

• CE, RoHS

Warranty

• Two years

Keyboard

• Use the keyboard to command the switch box to select ports or configure the SCAN delay.

Front Panel Interface

• Touch a button and be connected to a computer, or change modes of operation.
• LEDs indicate currently selected port and mode of operation.

RS232 Control

• Female RJ45 connector.
• Baud rate 300 through 9600, DIP switch selectable.
• Use DIP switches to address up to 15 units, all of which can be daisy-chained and controlled by one serial port.
• Seven segment displays show what input is connected to each output.

• Commands

  • RS - causes switch to reset so that IN1 connects to OUT1, IN2 connects to OUT2.
  • CS - causes one INx/OUTx connection to occur.
  • CA - causes all inputs to connect to specified output.
  • RO - reads what input is connected to specified output.
  • RU - reads size of matrix, reports number of inputs and number of outputs on specified switch.

On Screen Display (OSD)

• Select computers by name with the On Screen Display (OSD) option.
• Use keyboard or mouse to operate the switch from menus superimposed onto the monitor.
• Shows names of computers on cascaded switches up to 152 ports.
• Names can be up to 12 characters long.
• Power status of each computer is displayed.
• View usage statistics – power-on cycles and hours of usage.
• Helps screens assists users with the OSD.
• Modify the size and position of the OSD.
• OSD is built into the switch-no need to install additional hardware or software.
• OS and software-independent.

• Security

  • Advanced security included with OSD option.
  • Each user password can be up to 13 characters long, and each switch can store up to 63 users.
  • Administrator can enable or disable all security features and select which computers each user can access.
  • Once security is enabled, a user or administrator must login in order to access any of the computers connected to the switch.