Video Input
- Female DVI-I connectors.
- Signal type: single link digital DVI.
- Compatible with computers and HDTV video sources (satellite receivers, DVD players, etc) with DVI video.
- Multiplatform support: Windows 2000/XP/Vista/7, Windows Server 2000/2003/2008, Solaris, Linux, FreeBSD, and MAC OS 9/10.
Video Output
- Female DVI-I connectors.
- Signal type: single link digital DVI.
- Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
- Video bandwidth: 1.65 Gbps
Optional Audio Input
- 3.5mm stereo audio jacks.
- Impedance: 10k Ohm.
- Maximum input level: 1 Vrms or 2.5Vp-p.
Optional Audio Output
- 3.5mm stereo audio jacks.
- Drives 8-Ohm speakers.
- Unbalanced gain: user defined.
- Frequency response: 20 Hz to 20 kHz, +/-0.5 dB.
- Total harmonic distortion + noise: 0.01% at 1kHz.
- Gain adjustment: -20 dB to +10 dB in 2 dB steps.
- 200 mW RMS of continuous power per output.
- When switching ports, audio mutes until video has been synchronized.
Protocols
- HTTP, HTTPS
- TCP/IP, DHCP, UDP, ARP
- IPV4
Power
- 100 to 240 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.)
|
Cables
- Interface cables between the video sources and the switch are required for proper operation.
- Cables not included.
MTBF
| MTBF |
| NTI Part # |
Hours |
| SM-4X4-DVI-LCD |
74,502 |
| SM-8X8-DVI-LCD |
90,801 |
| SM-16X16-DVI-LCD |
48,326 |
| SM-32X32-DVI-LCD |
35,727 |
| SM-8X8-DVIA-LCD |
77,489 |
| SM-16X16-DVIA-LCD |
42,742 |
| SM-32X32-DVIA-LCD |
29,834 |
| |
|
Regulatory Approvals
Warranty
Compatible NTI Products
- Combine NTI’s extenders, switches, splitters and cables for complex applications
- DVI-I Single Link Interface Cable (DVI-IS-xx-MM)
- DVI-D to HDMI Single Link Interface Cable (DVI-HDMI-xx-MM)
- Stereo Audio Cable (SA-xx-MM)
- DVI Extender via Fiber Optic Cable (ST-2FODVI-LC)
- DVI Video Splitter (VOPEX-DVI-x)
- DVI/VGA Quad Screen Multiviewer (SPLITMUX-DVI-4)
- Screen Splitter / Video Wall Processor (SPLITMUX-SVDVI-4)
|
Ethernet Control
- Configuration can be done over the Internet via Web server or Telnet.
- Female RJ45 connector.
- 10/100 BaseT Ethernet interface.
-
- Security is ensured by password and user configurable timeout.
- Up to 25 users can access the web page at one time.
- The user can access the following pages:
- Switch page: allows the user to connect any input to any output, save and recall up to ten connections.
- Administration pages: administrator can access setup pages, port setting page and update firmware page. Assign names to video and audio inputs and outputs.
- Password page: allows the user to change the password for accessing the web interface.
- Help page: review documentation on the usage of the web interface.
- Update web server page: globally update the web server to any settings that have been changed.
- Logout page: view currently active connections and logout of the web interface.
-
Telnet
- Security is ensured by password.
- Commands are similar to RS232 commands.
- The telnet server listens on ports 2000 and 2005.
- Port 2000 is for an operator telnet session.
- Port 2005 is intended for a software control type session using raw TCP communication.
|
Front Panel Interface
- Configuration and control can be done using the front panel buttons.
- Keypad allows selection of the input source to be routed to the desired outputs.
RS232 Control
- Configuration and control can be done through the serial port.
- Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232.
Infrared Remote (Optional)
- Transmitter can be up to 30 feet away.
- Control up to 15 switches with one remote.
- Power: Two AAA batteries (included).
Downloads
|
Data Sheet (PDF)
